Brother BES-1240BC Maintenance Manual page 7

9 6 0 , 9
9 6 0 , 9
Website:
1. Remove the X-axis cover screws and remove the
X cover. Removing the X-axis cover is machine
specific depending on whether it is a 4 or 6 head
machine. Please consult your instruction book for
detailed instructions.
2. Remove the Y-axis covers from each end of the
machine by removing the 4 screws for each cover.
B E S - 9 4
B E S - 9 4
6 1 , 9 6 2 , 9 6
6 1 , 9 6 2 , 9 6
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER
Email:
http://www.brother-usa.com/industembroidery/tech_down.aspx
Monthly Maintenance
0 , 9 4 1 , 1 2 4
0 , 9 4 1 , 1 2 4
3 , 1 2 6 0 , 1 2
3 , 1 2 6 0 , 1 2
tsupport@brother.com
Greasing
Pantograph
3. Remove the sewing arm covers for head 3.
4. Using the white grease, lubricate all of the linear
rails in the V groove both sides of the rails for X-
axis, Y-axis plus the linear rail inside the sewing arm
of head 3. You will have to move the pantograph
both front to back and left to right to lubricate all
the grooves.
5. Reinstall all of the covers.
5/24/05 7
0 , 1 2 4 1
0 , 1 2 4 1
6 1 , 1 2 6 2 , 1
6 1 , 1 2 6 2 , 1
2 6 3
2 6 3