Brother BES-1240BC Maintenance Manual page 11

9 6 0 , 9
9 6 0 , 9
Website:
13. Remove the 3 screws and remove the wiper solenoid
assembly from the heads. Let the wiper solenoid
assembly rest on the pantograph.
14. Remove the left arm cover on the heads if the machine
has them by removing the 2 screws.
photo.
B E S - 9 4
B E S - 9 4
6 1 , 9 6 2 , 9 6
6 1 , 9 6 2 , 9 6
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER
Email:
http://www.brother-usa.com/industembroidery/tech_down.aspx
6 Month Maintenance
Cover is not shown in
0 , 9 4 1 , 1 2 4
0 , 9 4 1 , 1 2 4
3 , 1 2 6 0 , 1 2
3 , 1 2 6 0 , 1 2
tsupport@brother.com
Greasing
Heads continued
15. Remove the presser foot guide plates by
removing the 3 screws and unhooking the
spring from the rear of the plates.
16. Using the black grease fill the syringe by
pulling the plunger out and using a flat bladed
screwdriver to fill the syringe about ½ way.
Replace plunger in syringe and push on
plunger until grease comes out.
5/24/05 11
0 , 1 2 4 1
0 , 1 2 4 1
6 1 , 1 2 6 2 , 1
6 1 , 1 2 6 2 , 1
2 6 3
2 6 3