Brother BES-1240BC Maintenance Manual page 10

9 6 0 , 9
9 6 0 , 9
9. Remove the 4 hex bolts, 2 on each side of the head.
Do this for all the heads.
10. Cut threads between thread stand and head. Remove
head from machine by lifting up on it and unhook the
wire clamp and disconnect the 2 connectors at the
back. Do this for all heads.
B E S - 9 4
B E S - 9 4
6 1 , 9 6 2 , 9 6
6 1 , 9 6 2 , 9 6
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER
Email:
Website: http://www.brother-usa.com/industembroidery/tech_down.aspx
6 Month Maintenance
0 , 9 4 1 , 1 2 4
0 , 9 4 1 , 1 2 4
3 , 1 2 6 0 , 1 2
3 , 1 2 6 0 , 1 2
tsupport@brother.com
Greasing
Heads continued
11. Remove this bolt on the cap eaves guide
underneath each head.
12. Loosen this bolt and let the cap eaves guide
hang down.
5/24/05 10
0 , 1 2 4 1
0 , 1 2 4 1
6 1 , 1 2 6 2 , 1
6 1 , 1 2 6 2 , 1
2 6 3
2 6 3