1. Manuals
  2. Brands
  3. FMI Manuals
  4. Indoor Fireplace
  5. (V)PN36-A
  6. Owners manual and installation manual

FMI V)PN36-A Owners Manual And Installation Manual

Peninsula woodburning fireplace
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Peninsula woodBurning FirePlace
owner's oPeraTion and insTallaTion Manual
PFS
®
C
US
ICC-ES #ESR-2542
Models (V)PN36-A
SAVE THIS BOOK
This book is valuable. In addition to instructing you
on how to install and maintain your appliance, it also
contains information that will enable you to obtain re-
placement parts or accessory items when needed. Keep
it with your other important papers.
This fireplace is approved for use as a wood burning
fireplace or for use with a vented gas log approved
to ANS Z21.60, Z21.84 standards or for use with a
vent-free gas log heater approved to ANS Z21.11.2
standard.
This wood burning fireplace complies with UL127-
CAN/ULS-S610-M87 standard as a FACTORY BUILT
APPLIANCE.
FOR CANADA: The authority having jurisdiction (such
as the municipal building department, fire department,
etc.) should be contacted before installation to deter-
mine the need to obtain a permit.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
For more information, visit www.fmiproducts.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V)PN36-A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FMI V)PN36-A

Summary of Contents for FMI V)PN36-A

  • Page 1 Peninsula woodBurning FirePlace owner’s oPeraTion and insTallaTion Manual ® ICC-ES #ESR-2542 Models (V)PN36-A SAVE THIS BOOK This book is valuable. In addition to instructing you on how to install and maintain your appliance, it also contains information that will enable you to obtain re- placement parts or accessory items when needed.

  • Page 2: Table Of Contents

    Before beginning installation of this fireplace, tested for use with the insert. read these instructions through completely. • This FMI PRODUCTS, LLC fireplace and its This fireplace is not intended to be components are safe when installed accord- ing to this installation manual. Unless you...

  • Page 3: Product Dimensions

    saFeTy WARNING: Always leave Continued glass doors fully opened or fully closed when operating WARNING: Use solid wood fireplace. or processed solid fuel fire logs only. When processed wood WARNING: Children and fuel fire logs are used, do not adults should be alerted to the poke or stir the logs while they hazards of high surface tempera- are burning.

  • Page 4: Fireplace Installation

    FirePlace insTallaTion Spacers on Sides of Fireplace Provide 2" (5cm) Min. Clearance Required 1" (2.5cm) From Pipe to SELECTING LOCATION Clearance Combustibles To determine the safest and most efficient location for the fireplace, you must take into consideration the following guidelines: 1.

  • Page 5: Hearth Extension

    FirePlace insTallaTion Continued 2. If fireplace is to be installed directly on carpeting, tile (other than ceramic) or any combustible material other than wood flooring, fireplace must be installed upon a metal or wood panel extending full width 1/2" MIN. OVERLAP and depth of fireplace.

  • Page 6: Venting Installation

    FirePlace insTallaTion 2" X 4" Stud Continued Drywall Combustible Materials 33° 6" Nom. 12" Min. 9" Min. Fireplace Side View Front 3" Nom. Face 64" Min. " Max. 65" Min. Fireplace Front View 16" 20" Min. Figure 11 - Mantel Clearances to Min.
  • Page 7 Figure 13 - Outside Air Kit Installation WARNING: The opening in the CHIMNEY PIPE collar around the chimney at the The FMI PRODUCTS, LLC chimney is a top of the fireplace must not be snap-lock, double-wall pipe. It consists of a obstructed. Never use blown insula- stainless steel inner flue pipe(s), a galvanized outer pipe and a wire spacer.
  • Page 8 VenTing insTallaTion 2" (5.1cm) Minimum Continued Maximum length of pipe between supports Angled Firestop is 6' of angle run. Maximum of two 6' angle 2" (5.1cm) run sections per chimney system (see Figure Minimum 9, page 6). Ceiling Support 12S-12DM Support Straps Required...
  • Page 9 VenTing insTallaTion Uncommon circumstances such as neigh- boring hills, tall trees, or strong wind areas Continued can cause down drafts in chimney system. Existing In such cases, going beyond the minimum Ceiling recommended height would be preferable to Frame provide a better draw. Firestop The fireplace height approved for any chim- Spacer...
  • Page 10 VenTing insTallaTion Storm Overlap Collar Continued Shingles Top Flashing and Sides Only PENETRATING ROOF Cone To maintain a 2" clearance to pipe on a roof with Nail Only a pitch, a rectangular opening must be cut. Outer Perimeter 1. Determine the center point through which of Flashing pipe will penetrate roof.
  • Page 11 VenTing insTallaTion FINISHING FIREPLACE Continued Combustible materials, such as wallboard, gypsum board, sheet rock, drywall, plywood, RLT-12D Stainless etc. may make direct contact with sides and Inner Flue Chase top around the fireplace face. It is important Pipe that combustible materials do not overlap the Screen face itself.

  • Page 12: Optional Gas Line Installation

    oPTional gas line CAUTION: All gas piping insTallaTion and connections must be tested for leaks after the installation WARNING: A qualified is completed. After ensuring service person must connect that the gas valve is on, apply fireplace to gas supply. Follow soap and water solution to all all local codes.

  • Page 13: Operation And Maintenance Guidelines

    Doors, if left partly open, position. may draw gas and flame out of Note: An appropriate FMI PRODUCTS, LLC the fireplace opening creating hood (see Replacement and Accessory Parts, risks of both fire and smoke.

  • Page 14: Technical Service

    Technical serVice You may have further questions about instal- lation, operation, or troubleshooting. If so, contact FMI PRODUCTS, LLC at 1-866-328- OUTSIDE AIR 4537. When calling please have your model HANDLE PULL TO CLOSE and serial numbers of your heater ready.

  • Page 15: Replacement And Accessory Parts

    rePlaceMenT and accessory ParTs ADjUSTABLE HOOD Vent Plaster Black - GA6050 Vent Hood Collar Brass - GA6053 Connector Duct - 4" x 3' OUTSIDE AIR KIT - AK4 GRATE 11150 STORM COLLAR - SC2-1 FIRESTOP SPACER FS-10 for Straight Pipe EMBER 30FS-10 for 30°...
  • Page 16 2701 S. Harbor Blvd. Santa Ana, CA 92704 115607-01 1-866-328-4537 Rev. D www.fmiproducts.com 09/09...

This manual is also suitable for:

Pn36-aVpn36-a

Table of Contents