Putting It Away - Bissell 1697 POWERSTEAMER PRO SERIES User Manual

Maintenance/Putting it away
CAUTION:
POWERSTEAMER
uses water and must not
be stored where there
is a danger of freezing.
Freezing will damage
internal components and
void the warranty.
14
1. Turn Power switch OFF.
2. Unplug power cord from the outlet and coil around
machine cord wrap.
3. Remove and rinse tools in clean, running water, dry and
replace in tool caddy.
4. Coil flex hose around storage brackets on tool caddy.
5. Remove Tank-in-Tank,
Basics section, page 8.
6. Rinse out the Tank-in-Tank
7. Clean out the Flow Indicator Filter each time it is used to
insure best cleaning performance. Unscrew the Flow
Indicator Cap, lift out the red Rotor and white Filter.
Tip:
Rinse all three parts in tap water. Replace the Filter and
Rotor. Replace the Flow Indicator Cap; turn until snug,
SmartMix®
do not over-tighten.
Bottle may be
8. To remove the Clear Nozzle for cleaning out remaining
stored with
dirt and carpet fibres, unscrew the two screws with a
concentrate
ready for Phillips
your next
the handle and lift out. Wipe machine base with a clean
cleaning job.
damp cloth. Rinse nozzle in tap water and replace. Catch
the two tabs in the notches at the top, then rotate down
and replace the screws.
9. Wipe all exterior surfaces with a soft cloth.
10. Store cleaner upright in a protected, dry area.
® PRO ™
Set
dial to:
™ dispose of dirty water. See The
™ and replace on the machine.
Cap
Rotor
Filter
screwdriver. Rotate the Clear Nozzle up toward