Start Here; Product Illustrations - NETGEAR RM356 Installation Manual

Start Here

Product Illustrations

Congratulations on your purchase of a NETGEAR
These instructions show you how to configure your Windows
router for basic Internet access through an Internet service provider (ISP). For more detailed
information about installing your router or configuring advanced features, refer to Reference
Guide for the Model RM356 Modem Router.
Front Panel of the Router
The front panel of the Model RM356 router contains status LEDs. Refer to the illustration and
table below for descriptions of the LEDs on the front panel of the router.
56
kbps
Modem Router
PWR
Remote Access
Front Panel of the Model RM356 Modem Router
Label Activity
PWR (Power) On
TEST Blinking/Off
LAN
COL (Collision) Blinking
1-4 On
Blinking
MODEM
OH (Off Hook) On
CD On
(Carrier Detect)
TX (Transmit) Blinking
RX (Receive) Blinking
Model RM356 Modem Router Installation Guide
™
Model RM356 Modem Router.
LAN LEDs
LAN
TEST COL 1 2 3 4
Test LED
Power LED
Description
Power is supplied to the router.
The router is functioning properly. This LED blinks during
initialization and then turns off.
Data collision is occurring on the LAN.
The numbered LAN port is synchronized with an
attached device.
Data is being received on the LAN port.
The modem is in use.
A valid carrier is present on the line.
Data is being transmitted on the MODEM port.
Data is being received on the MODEM port.
®
PC network and your NETGEAR
MODEM LEDs
RM356
MODEL
MODEM
OH CD TD RD
8604FA