Option Menu - Hitachi CPRS55 - PERFORMA Home Theater Projector User Manual

Multifunctional settings

OPTION menu

With the OPTION menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress, except for the items LAMP
TIME and FILTER TIME. Then perform it referring to the
following table.
Item
AUTO SEARCH
AUTO OFF
38
Using the buttons ▲/▼ turns on/off the automatic signal search
function.
TURN ON  TURN OFF
When the TURN ON is selected, detecting no signal automatically
cycles through input ports in order of following. Then when an input
is found, the projector will stop searching and display the image.
RGB  S-VIDEO  VIDEO
Using the buttons ▲/▼ adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
When the time is set to 0, the projector is not turned off
automatically.
When the time is set to 1 to 99, and when the passed time with
a no-signal or an unsuitable signal reaches at the set time, the
projector lamp will go off and the power indicator begins blinking.
Please refer to the section "Turning off the power" (17).
Description
10
MENU [ RGB ]
PICTURE AUTO SEARCH
IMAGE AUTO OFF
INPUT LAMP TIME
SETUP FILTER TIME
SCREEN SERVICE
OPTION
EASY MENU
AUTO OFF
DISABLE
0
:SELECT
TURN OFF
0
0
0