Ricoh AFICIO2060 - Aficio 2060 B/W Laser General Settings Manual page 69

❖ ❖ ❖ ❖ Paper Type: Bypass tray
You can sets the display to show the type of paper loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
• Plain paper (No Display), Recycled Paper, Special Paper, Colour Paper
1, Colour Paper 2, Translucent Paper, Letterhead, Thick Paper, Label
Paper, OHP, Cardstock, Bond Paper, Prepunched Paper, Preprinted Pa-
per
Note
❒ Default: No Display
❖ ❖ ❖ ❖ Paper Type: (Tray1-3, LCT)
You can sets the display to show the type of paper loaded in each of the trays.
This information is used by the print function to automatically select the pa-
per tray.
• The paper types you can set for trays are as follows:
• Plain paper (No Display), Recycled Paper, Special Paper, Translucent
Paper, Letterhead, Thick Paper, Colour Paper 1, Colour Paper 2, Tab
Stock (2-3 tray), Bond Paper, Prepunched Paper, Preprinted Paper
Note
❒ Default:
• Paper Type: No Display
• Copying Method: 2 Sided Copy
• Apply Auto Paper Select: Yes
❒ A
mark is displayed next to the paper tray if "No" is selected.
❒ The optional tab sheet holder is required when using tab stock in tray 2 or
3.
❒ The number of tab stock shifts can be set in millimeters, when [Tab Stock]
has been selected.
❒ The number of tab stock shift can be set in 1 millimeter (1 inch) units, with-
in a range of 0 to 15 mm(0" to 0.6"). The default is 13 mm(0.5").
❒ "Thick Paper" and "Tab Stock" can be set simultaneously.
Limitation
❒ [Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid.
❖ ❖ ❖ ❖ Cover Sheet Tray
You can specify and display the paper tray that is used to set cover sheets. Af-
ter selecting the paper tray, you can also specify the display timing and copy
method for two-sided copying.
Note
❒ Default:
• Tray to Program: Off
Settings You Can Change with User Tools
4
57