Configuring Confirmation Options; Exporting And Importing A Configuration Using The Embedded Web Server - Lexmark MX6500e 6500e Administrator's Manual

Configuring the application
•
Default scale setting—Set the size of the scanned card when printed. The default is 100% (full size).
• Color Output—Select the check box to print the scanned card in color, or clear it to scan in black and white.
•
Resolution setting—Adjust the quality of the scanned card.
•
Multi Card Scan—Select the check box to scan multiple cards. This setting is available depending on the
application you are using.
• Print Borders—Select the check box to print the scanned image with a border around it.
3
Save or discard your changes. Do one of the following:
•
Click Restore Defaults to restore all fields to factory default settings.
•
Click Reset to cancel changes to all fields and begin again.
• Click Apply to save changes to the profile.
Note: Reset and Apply are the only options available on certain devices.

Configuring confirmation options

1
Access the application configuration settings from the Embedded Web Server.
2
In the Confirmation Page section, select the Display Confirmation Page check box to see a confirmation page on
the control panel after copying or scanning the card.
3
Save or discard your changes. Do one of the following:
• Click Return to go back to the main configuration page without making any changes.
• Click Restore Defaults to return all fields to factory default settings.
• Click Reset to cancel changes to all fields and begin again.
•
Click Apply to save changes.
Note: Reset and Apply are the only options available on certain devices.

Exporting and importing a configuration using the Embedded Web Server

You can export configuration settings into a text file, and then import it to apply the settings to other devices.
1
From the Embedded Web Server, click Settings > Apps > Apps Management.
2
From the list of installed applications, click the name of the application you want to configure.
3
Click Configure, and then do either of the following:
• To export a configuration to a file, click Export, and then follow the instructions on the computer screen to save
the configuration file.
Note: If a JVM Out of Memory error occurs, then repeat the export process until the configuration file
is saved.
•
To import a configuration from a file, click Import, and then browse to the saved configuration file that was
exported from a previously configured device.
Notes:
–
Before importing the configuration file, you can choose to preview it first.
–
If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
6