PRESCRIBE commands
For more information on PRESCRIBE see the following:
•
Kyocera PRESCRIBE Commands COMMAND REFERENCE, version 4.8
•
Kyocera PRESCRIBE Commands TECHNICAL REFERENCE, version 4.8
Command explanations
BARC: draw BAR Code
The extent of PRESCRIBE bar code support in version 41F is summarized in the following table. The number specified
is used to select the bar code using the BARC command. Unsupported numbers are ignored.
UPC A
UPC A with two-digit supplement
UPC A with five-digit supplement
UPC D-1
UPC D-2
UPC D-3
UPC D-4
UPC D-5
UPC E
UPC E with two-digit supplement
UPC E with five-digit supplement
EAN-8
EAN-13
DUN-14 (Distribution Unit Number, EAN)
DUN-16 (Distribution Unit Number, EAN)
MSI with no check digit
MSI with single mod-10 check digit
MSI mod-10 followed by mod-10 check digit
MSI mod-11 followed by mod-10 check digit
Code 39 with no check digit (USD-3)
Code 39 with mod-43 check digit (USD-3)
Interleaved two of five (USD-1) with no check digit
Identicon two of five with no checksum
Code 128 (USD-6) "code-b"
Code 128 (USD-6)
Bar code type
Number
Supported
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
11
Yes
No
No
No
No
No
No
No
Yes
No
No
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes