After the CONCATENATION drive(s) is set, the message "Are You Sure?" will display before completing the configuration.
Answer "N" to abort the creation of the CONCATENATION, or "Y" to proceed with the CONCATENATION creation.
6.4 Deleting RAID Groups, Spare Drive, and Concatenation
1.
To remove one or more RAID sets, spare drives, and concatenations, select "Delete RAID set"
2.
Select the desired item to delete from the logical drive list and press Enter.
3.
Press "Y" when asked, "Are You Sure?"
4.
The drives will be returned to the selection of logical drives from which a new RAID set can be created.
14
SATARAID5 User's Manual