Craftsman 358.792421 Operator's Manual page 8

MAINTENANCE SCHEDULE
WARNING: Always stop unit and disconnect spark plug wire (or discon-
nect powerhead from power source) before performing maintenance.
CARE AND MAINTENANCE TASK
Check for loose fasteners and parts
Check for damaged or worn parts
Inspect and clean unit and labels
G ENERAL RECOMMEN DATIONS
The warranty on this unit does not cov-
er items that have been subjected to
operator abuse or negligence. To re-
ceive full value from the warranty, the
operator must maintain attachment as
instructed in this manual.
WHEN TO PERFORM
Before each use
Before each use
After each use
CHECK FOR LOOSE FASTENERS
AND PARTS
• Housing Screws
INSPECT AND CLEAN UNIT
AND LABELS
• After each use, inspect complete unit
for loose or damaged parts. Clean
the unit and labels using a damp
cloth with a mild detergent.
• Wipe off unit with a clean dry cloth.
,,"%
WARNING: Perform the following
steps after each use:
• Allow attachment to cool before stor-
ing or transporting.
• Store in a high, cool, dry, indoor area
out of reach of children.
SEASONAL STORAGE
Prepare attachment for storage at end
of season or if it will not be used for 30
days or more.
If your blower attachment is to be
stored for a period of time:
• Clean the entire unit.
• Inspect attachment for any loose or
damaged parts. Tighten any loose
screws.
• Replace any damaged, worn or bro-
ken parts.
• At the beginning of the next season,
use only fresh fuel having the proper
gasoline to oil ratio.
-8-