Installing Handle; Removing Handle; Installing Accessory Storage Bag - Craftsman 113.179100 Owner's Manual

Assembly (continued)
Installing Handle
Press and hold release buttons while
installing handle into handle receptacles
in drum (See illustration).
NOTE: An audible snap of release
buttons indicates successful engagement
of handle.
Removing Handle
Press and hold release buttons as
shown. While firmly pushing in release
buttons, pull handle upwards to remove
(see illustration).
/
Installing Accessory Storage
Bag
1. Install tool holder as shown with
extension wand holders facing unit.
Accessory Storage
Bag Snaps Bag
Straps (4)
Handle
Wand
Storage
Locations
2. As an alternative storage solution,
the tool holder may hang on a wall.
Two wall mounting hooks (not provided)
must be secured to the wall as shown
(sold separately).
zGrommet
_" Wall Mount
Hook
Wall
11