Craftsman 315.175342 Operator's Manual page 11

TO INSTALL THE FIXED BASE
See Figures 4 - 6,
[] Unplug the router.
[] Place the fixed base on a flat surface.
[] Loosen the locking arm.
[] Align the indicator arrow on the depth adjustment ring
with the indicator point on the base.
[] Align the groove in the motor housing with the tab
inside of the base.
NOTE: The tab is located on the inside of the base in
line with the handle.
[] Depress and hold the spindle lock button on the motor.
[] Slide the motor housing into the base.
[] Turn the depth adjusting ring counterclockwise until
the spindle lock snaps out as it clears the rear window,
just below the locking arm.
[] Tighten the locking arm.
LOCKING
KNOB
TABiNSiDE
BASE
DEPTH
ADJUSTMENT
RING
INDICATOR
ARROW
INDICATOR POINT
Fig. 5
DEPTH
ADJUSTMENT
RING
Fig. 6
SPINDLELOCK
BUTTON
Fig. 4
11