Advertisement
NAME AND FUNCTION OF EACH PART
MENU Button
OSD MENU EXIT Button
Dome Light Button
M
E
MENU
AV
EXIT
ON
AV Select Button
Interface Switch Function
Power Power ON/OFF
AV
Signal Select
Menu
Press this button for OSD menu.
And select menu option
+
Increase current option value.
-
Decrease current option value.
POWER KEY
- KEY
LCD MONITOR
REMOTE CONTROL UNIT
POWER Button
OFF
+/- Buttons
AV1/AV2 KEY
MENU KEY
+ KEY
7
CAUTION
Quality installations are best
performed by qualified and
certifled installers.
Don t touch the unit if there is
a flash of lightning. It may
receive an electric shock.
Do not cover heater ducts or vents.
This may cause a fire or an electric
shock.
Check Point
1. The operating temperature of this product is limited to 14 F~140 F
(-10 C~60 C).
Your vehicle can reach temperatures up to 100 C in the summertime.
2. When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when these operating ranges are achieved.
3. Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
4. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
5. If you cann't find the files name in list when playing, please reset units or turn
off/on over again.
6. If the unit cann't be change mode when playing some special files which the
unit didn't support, please reset units or turn off/on over again.
CAUTION
Watching the monitor for an
extended period of time
with the engine turned off
may deplete the vehicle s
battery.
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
4
Advertisement
