Extreme Networks Summit 300-48 Software User's Manual page 167

Table 61: UDP-Forwarding Commands (continued)
Command
config vlan <name> udp-profile <profile_name>
create udp-profile <profile_name>
delete udp-profile <profile_name>
show udp-profile {<profile_name>}
unconfig udp-profile vlan [<name> | all]
Summit 300-48 Switch Software User Guide
Description
Assigns a UDP-forwarding profile to the
source VLAN. Once the UDP profile is
associated with the VLAN, the switch picks
up any broadcast UDP packets that
matches with the user configured UDP
port number, and forwards those packets
to the user-defined destination. If the UDP
port is the DHCP/BOOTP port number,
appropriate DHCP/BOOTP proxy functions
are invoked.
Creates a UDP-forwarding profile. You
must use a unique name for the
UDP-forwarding profile.
Deletes a UDP-forwarding profile.
Displays the profile names, input rules of
UDP port, destination IP address, or VLAN
and the source VLANs to which the profile
is applied.
Removes the UDP-forwarding profile
configuration for one or all VLANs.
UDP-Forwarding
167