Using The Securestack C2 Manual Set - Enterasys C2RPS-SYS Installation Manual

Using the SecureStack C2 Manual Set

Using the SecureStack C2 Manual Set
Other manuals have been developed for the SecureStack C2 non‐PoE switch devices that
can be connected to the RPS for power redundancy.
The SecureStack C2 switch manuals explain how to install the switch device, connect
network cable segments to the SecureStack switch device, and configure the switch device
using the command line interface commands described in the SecureStack C2 Configuraton
Guide.
Each manual is written for qualified personnel who are responsible for installing the
switch device and also have a general working knowledge of data communications
networks and their physical layer components.
xii About this Guide
Caution: The RPS does not support PoE-compliant SecureStack switches. Do not try to
connect the power cable from this RPS to any SecureStack switch with a "P" suffix in the
model name, such as C2xxxxx-xxP. Otherwise, damage to the device may result.
Precaución: El RPS no es compatible con switches SecureStack C2 con PoE. No intente
conectar el cable de corriente del RPS a ningún switch SecureStack C2 que tenga el sufijo
"P" en el nombre del modelo, tal como C2xxxxx-xxP. De lo contrario, el dispositivo puede
dañarse.
Note: Connection of the RPS system does not require the reconfiguration of the
connected Ethernet Switch.