Fan Speed And Airflow Direction Adjustment; Timer Operation; Airflow Direction - Mitsubishi Electric MR. SLIM MCF-D18VD Operating Instructions Manual

• OPERATING INSTRUCTIONS •
F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT
I FEEL COOL I FEEL COOL
FAN FAN DRY DRY
Press to select fan speed. Each press changes
fan speed in the following order:
(AUTO) (Low)
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
1 2
( ) ( )
(AUTO)
• Two short beeps are heard from the indoor unit when set to AUTO.

Airflow direction

(AUTO) .............The vane is set to the most effi cient airfl ow direction.
Floor standing unit:
COOL/DRY: upward. FAN: horizontal.
Ceiling suspended unit:
COOL/DRY: horizontal. FAN: downward.
(Manual) .......For effi cient air conditioning, select position 1 or 2 for COOL/DRY.
During COOL/DRY, when the vane is set to position 4 or 5,
vane automatically moves to position 1 after 1 hour to prevent
water dripping.
(Swing) ............. The vane moves up and down intermittently.
To change the horizontal airfl ow direction.
■
Move the vertical vane manually before starting operation.
Floor standing unit
En-5
AMPM
AMPM
(Med.) (High)
3 4 5
( ) ( ) ( )
(SWING)
Ceiling suspended unit
T
IMER OPERATION (ON/OFF TIMER)
I FEEL COOL I FEEL COOL
FAN FAN DRY DRY
1
Press or during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
* or blinks.
* Make sure that the current time is set correctly.
2
Press and to set the time of timer.
Each time is pressed, the set time increases by 1 hour; each time
is pressed, the set time increases by 10 minutes.
3
Press or
Note:
• ON and OFF timers can be used in combination.
of timer operations.
• If power failure occurs while ON/OFF timer is set, see
function"
AMPM
AMPM
Page 3
again to cancel timer.
mark indicates the order
page 4 "Auto restart