Cleaning And Replacing Filters; Hepa Filter - Eureka 5550 Series Owner's Manual

Cleaning and Replacing Filters

HEPA Filter

Inspect the HEPA filter periodically and change as
needed. For maximum efficiency, replace the HEPA
filter periodically.
To Replace HEPA Filter
1. Push down on latch and pull out on HEPA filter
door to remove.
2. Grasp filter and pull out.
3. Place new HEPA filter into cleaner.
4. To close, place HEPA filter door on top of bottom
tab, pivot door up and press door against cleaner
until it latches.
Use replacement HEPA filter supplied, Style GE1, part
number, 62134..
How To Change Light Bulb
CAUTION: Turn off the power switch and
unplug the electrical cord before
changing light bulb.
1. Lower handle to remove two screws from lens
cover.
2. Pull lens cover from cleaner.
3. Support socket with one hand and pull light
bulb straight out to release.
4. Place new light bulb into socket; push to
secure.
5. Push light bulb and socket back
so bulb will not touch lens cover.
6. Replace lens cover.
7. Secure with two screws.
Use replacement light bulb, 57940-3.
14
HEPA
Filter
Latch
HEPA
Filter
Door
Lens
Cover