Brushroll & Blockages; How To Maintain - Eureka 570A Owner's Manual

HOW TO MAINTAIN

Brushroll
NOTE: Turn off switch and remove battery before
inspecting brushroll.
Long hair, thread, string, etc. can wrap around the revolving
brushroll and result in reduced performance.
To check brushroll for debris turn cleaner nozzle over and
inspect for wrapped matter. Use scissors to cut debris from
brushroll. When brushroll is clean reinstall the battery and
resume operation.
How to Check for Blockages
NOTE: Turn off switch and remove battery before checking for blockages.
If suction performance diminishes and battery is still strong, check for blockages in
suction path.
1. Remove dust cup and set aside.
Remove battery and set aside.
3. Inspect dirt channel in brushroll area
leading to body opening. (After removing
battery, check for blockages in brush roll
area.) Remove blockage with tool or
coat hanger.
(continued)
2. Inspect for blockages inside hole area
Brushroll
Hole
at base of body opening. Use tool or
coat hanger to remove blockage.
4. Reinstall dust cup and battery.
Brushroll
9