Bissell Velocity® Vacuum 75B21 User Manual page 7

O
perations
Tools
attach desired tool to hose for above
floor cleaning surfaces or hard to
reach areas.
1. Remove Hose: With vacuum in upright
position, separate curved hose from
hose base.
2. Attach tools by firmly pushing onto
vacuum hose or extension wand.
a. dusting brush/upholstery
tool: Use brush side to dust furniture,
blinds, lamps, shelves, and baseboards.
Slide brush off to use upholstery tool on
cushions, draperies, and fabrics.
b. crevice tool: Use in tight narrow
spaces.
c. extension Wand: Use with
desired attachment for longer
reach.
d. curved hose Wand: Use with
desired attachment for a longer
reach.
note:curved hose Wand
must be installed while using
machine in upright position.
e. turbobrush
brush action for small flat areas
such as stairs and cushions. Press
gently down and pull towards you
in raking motion, too much pres-
sure will cause brush to stop
rotating.
Clean Filter Indicator
the indicator tells you when the air flow
in your vacuum is reduced due to dirty
filters or a clog in the hose. the indica-
tor will remain green until the air flow
is reduced – and then will change to red
or black. When fully red, the airflow is
greatly reduced or clogged by a dirty
filter. When fully red, follow instructions
on page 8 to clean/replace your filters. if
indicator turns black, follow instructions
on page 11 to check for and clear clogs.
note: When vacuum is off, the
clean filter indicator will turn red.
the indicator only detects reduc-
tions in airflow when the vacuum
power is on.
w w w . b i s s e l l . c o m
DJ68-00375N(EN)-0.0.indd 7
® tool: Use rotation
1.
Clean Filter
Indicator
8 0 0 . 2 3 7 . 7 6 9 1
10. 11. 12
7
4:23