Creating A Raid Set - Asus Z9PR-D12 SERIES User Manual

5.3.1

Creating a RAID set

To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation.
Enter a unique volume name that has no special characters and is
[↑↓]Change
2. Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select
3.
a RAID level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
Select 2 to 6 disks to use in creating the volume.
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5. Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
ASUS Z9PR-D12 Series
[ CREATE VOLUME MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Create Volume
[ HELP
16 characters or less.
[TAB]-Next [ESC]-Previous Menu
[ SELECT DISKS ]
Serial # Size
HWAS0000991753TR 279.3GB
37VN00009846RAJ1 279.3GB
397600009846UEDY 279.3GB
GWC50000991756G6 279.3GB
All Rights Reserved.
]
]
[ENTER]-Select
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
5-27