Removing & Replacing Batteries; Your Sim Card - Ericsson CF337 User Manual

REMOVING & REPLACING
BATTERIES
Your battery is designed to be easy to remove in case you need to
change batteries or access your SIM Card.
To remove a battery:
> Press the key (on CF337, press PWR) and hold to turn
off power to your handset.
> Push the battery tab up slightly from
the bottom of the handset.
> Lift the battery away from the
handset.
To replace a battery:
> Place the battery top against the back of the handset.
> Slide the battery gently upward
until it locks into place.
> Lock the battery into position by
pressing it against the handset.
15
Inside your Omnipoint handset, there's an ingenious and
intelligent component: the SIM (Subscriber Identity Module)
Card.
Your SIM Card has a computer chip that can store digital
information, including your personal Phone Book, text messages, and
the information your handset needs to operate.
(Note: keep all SIM Cards out of reach of small children.)
The SIM Card is pre-loaded in the card holder on the back of your
handset, beneath the rechargeable battery. If your SIM Card is
missing from your handset or has been inserted improperly, you'll see
the message "Insert Card" on your display. The handset will not
function when the SIM Card is removed (except for 911 calls).
In most cases, you never have to touch your SIM Card. But you can
remove your SIM Card if necessary – for example, to use in another
handset or to loan your handset to someone for use with their card.
Here's how:
> First, switch your handset off by pressing the
holding it until you hear a click.
> Remove your battery (see p. 15).
> Release the SIM Card holder by sliding it toward the top of the
handset.
> Flip up the SIM Card holder.
> Slide the SIM Card out of its holder.

YOUR SIM CARD

key and
16