Table of Contents
Advertisement
LBI-39175A
Operational Software Fatal System Errors
ERROR NAME
RADC_PITD_ERROR
RADC_PIHW_ERROR
RADC_FREQ_ERROR
RADC_PITD_MALLOC_ERROR
RADC_PITD_CKSUM_ERROR
DACS_NO_LOCK
DACS_MODEM_FATAL_ERROR
DACS_RADC_FAILURE
DACS_MODEM_RXOVR
DACS_MODEM_RXAVR
CONV_RADC_ERROR
CONV_NOLOCK_ERROR
CONV_PUT_UIMSG_ERROR
CONV_MODEM_RXOVR
CONV_MODEM_RXAVR
CONV_MODEM_FATAL_ERROR
CONV_PERS_ERROR
PI_NOPERS_ERROR
PI_CRC_ERROR
PI_DESC_CRC_ERROR
PI_MALLOC_ERROR
UI_FATAL_DEVICE_ERROR
UI_FATAL_SWTO_
MALLOC_ERROR
UI_FATAL_SWTO_MAX_ERROR
UI_FATAL_WINDOW_MAX_
ERROR
UI_FATAL_WINDOW_MALLOC_
ERROR
UI_FATAL_MESSAGE_INVPARM
UI_FATAL_RI_MSGBUF_FULL
UI_FATAL_RISYS_MSGBUF_FULL
UI_FATAL_CI_MSGBUF_FULL
UI_FATAL_DEVICE_
NOTSUPPORTED
UI_FATAL_AUXIO_MALLOC_
ERROR
UI_FATAL_NET_DEVICE_ERROR
UI_FATAL_INVALID_CUID
UI_FATAL_NO_TONE_DATA
UI_FATAL_UII0_MSGBUF_FULL
AEGIS_ADI_OVERFLOW
AEGIS_RXBUF_MALLOC_ERROR
AEGIS_KEYLOAD_MALLOC_
ERROR
AEGIS_KEYLOAD_ERROR
AEGIS_DATAMEM_MALLOC_
ERROR
AEGIS_KEYLOAD_NOTABL
22
MESSAGE
CODE
TRACKING
200
Personality tracking data error. Re-program the tracking data.
PERSDATA
201
Personality hardware data error. Re-program the personality.
FREQDATA
202
Personality frequency data error. Re-program the personality.
SOFTWARE
203
Personality tracking data malloc error. Re-program the tracking data.
SOFTWARE
204
Personality tracking data checksum error. Re-program the tracking data.
NO LOCK
300
Synthesizer did not lock or became unlocked. Check the frequencies in the PC
programmer and re-program the radio personality.
SOFTWARE
301
Unable to correctly configure the modem for EDACS operation. Re-program
the personality.
SOFTWARE
302
Power cycle the radio.
SOFTWARE
304
Hardware Modem overflow. Power cycle the radio.
SOFTWARE
305
Power cycle the radio.
SOFTWARE
400
Error calling RADC function. Power cycle the radio.
NO LOCK
401
Synthesizer became unlocked. check the frequencies in the PC programmer
and re-program the radio personality.
SOFTWARE
402
UI message buffer not enabled. Power cycle the radio.
SOFTWARE
403
Conventional DIGV modem overflow.
SOFTWARE
404
Conventional DIGV modem underflow.
SOFTWARE
405
Unable to correctly configure the modem for conventional DIGV operation.
PERSDATA
407
Conventional personality error.
PERSDATA
500
Personality data is not present. Program the personality.
PERSDATA
501
Flash personality CRC did not match EEPROM. Re-program the personality.
PERSDATA
502
Crucial personality data has incorrect CRC. Re-program the personality.
SOFTWARE
503
Could not allocate memory to store crucial personality data.
PERSDATA
600
Input/Output device error.
SOFTWARE
601
Software memory error.
SOFTWARE
602
Software error, power cycle the radio.
SOFTWARE
603
Too many open windows.
SOFTWARE
604
Software memory error.
SOFTWARE
605
Invalid parameter to UI_PUT_MESSAGE(). software error, report how error
was encountered.
SOFTWARE
606
UI Task message buffer full error. Software error, report how error was
encountered.
SOFTWARE
607
Radio Interface System (EDACS/CONV) task message buffer full.
SOFTWARE
608
CI Task message buffer full.
PERSDATA
609
I/O device type (from personality) not supported.
SOFTWARE
610
Software memory error.
SOFTWARE
611
Network I/O device error
SOFTWARE
612
CU ID is invalid or CU not connected. Insure that CU ID is CUA and DUAL
is disabled in personality.
SOFTWARE
613
No tone data is available in personality.
SOFTWARE
614
UI I/0 BBOS message buffer full.
SOFTWARE
801
ADI Transmit event not serviced in time and buffer has overflown.
SOFTWARE
802
No memory available.
SOFTWARE
803
No Keyloader table memory available.
SOFTWARE
804
General Keyload error has occurred.
SOFTWARE
805
No memory is allocated for data.
SOFTWARE
806
No key table was found in EEPROM.
DESCRIPTION
Advertisement
Table of Contents
