Canon PowerShot A400 User Manual page 100

Vanous Functions
• All procedures performed with a
connection to a USB 2.0 compliant
board are not guaranteed.
I Install the driver and the software
applications bundled on the
Canon Digital Camera Solution
Disk (first time only).
• Please see the Software Starter Guide for the
installation procedures.
2 Use the supplied interface cable
to connect the computer's USB
port to the camera's DIGITAL
terminal.
Interface
:3//f_// DIGITALTerminal
J///_ 1.0pen the terminal
___ I/I [IJ._/ cover with your
A"'_L-£(_J_ fingernail.
_ 2.Insert the connector
with _ facing up.
Always grasp the
connector's sides to
remove the interface
_----___ cable from the
camera's DIGITAL
terminal.
3 Set the camera's mode switch to 1_7.
4 Press the ON/OFF button until the
upper indicator lights green.
• Windows -_ Proceed to steps 4 and 5
below.
• Macintosh -_ Refer to the Soflware Starter
Guide and download images.
98