Canon PowerShot A400 User Manual page 25

Hide thumbs Also See for PowerShot A400:
Table of Contents

Advertisement

Turning
the Power
On/Off
Turning
the
Power
On
I
Press the ON/OFF button until the
upper indicator next to the
viewfinder lights green.
Shooting
Mode
a Current shooting settings will appear in the
LCD monitor.
a Current shooting settings will disappear
in about 6 seconds when the LCD
monitor is set to Standard (No
information)
or No DispIay(p. 26).
• If you tum the mode switch to [_, the lens
.
will retract after approximately 1 minute
Playback
Mode
a The LCD monitor displays an image.
Turning
the
Power
Off
a Press the ON/OFF button again to turn the
power off.
a If the "Card locked!" message appears
right after the power is turned on, the SD
card cannot record (p. 15).
• You will hear a start-up sound and see the
start-up image when the power comes on.
(To change the start-up sound and image,
see below and p. 71 and 106.)
• The start-up image does not appear
when the LCD monitor is off in Shooting
mode or the AN OUT terminal is
connected to a TV.
Turning
on the camera without
the
start-up sound and image
Press and hold the SET button, then
turn on the power.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents