Selecting The Playbackstarting Point - Canon VIXIA HF R20 Instruction Manual

(_ NOTES
When an external microphone is connected to the camcorder,
O _Nind Screen] will automatically be set to [_ Off _/¢].
If the audio level is too high and the sound gets distorted, turn on the
microphone attenuator with the _ O [Microphone Attenuator] set-
ting or adjust the audio recording level manually (C]_ 75).
Selecting the PlaybackStarting Point
If you have a very long scene, you may want to start playing back the
scene from a certain point. You can use the movie timeline to break the
scene to segments at fixed time intervals ranging from 6 seconds to 6
minutes.
Operating modes: I
1 Open the date index screen.
2 Open the scene's [Timeline] screen.
{_ [i] _} Desired Scene
The [Timeline] screen appears. The large thumbnail will show the first
frame of the scene. Below it, the timeline ruler shows frames taken
from the scene at fixed intervals.
3 Touch the desired frame in the timeline ruler to start playing back
the scene from that point.
80 * Vdeo