Canon VIXIA HF R20 Instruction Manual page 78

O _MPORTANT
When using h eadphones, make sure t olower the volume toanappro-
priate level.
Do not c onnect the headphones tothe AV OUT/O t erminal ifthe O
icon d oes n ot a ppear onthe screen. The n oise output insuch c ase m ay
beharmful toyour hearing.
C"{D N OTES
Use commercially available headphones with a_ 3.5 mm minijack.
Even if[AV/Headphones] was s et t o[_ Headphones] inaplayback
mode, the function ofthe AV OUT/O t erminal will r eturn automatically to
AV output when y ou turn off t he camcorder.
Using an External Microphone
When recording in very quiet surroundings, the built-in microphone
may pick up the sound of the camcorder's internal machinery. In such
case, we recommend using an external microphone, such as the
optional WM-Vl Wireless Microphone.
Operating modes:
Usingthe WM-V1WirelessMicrophone
With the WM-VI Wireless Microphone,
you can record audio in a variety of situa-
tions. After you affix the microphone unit
to the subject, sound is transmitted to
the receiver unit connected to the cam-
corder's MIC terminal. This will allow you
to record sound that is difficult to pick up
by the camcorder's built-in microphone
alone. You can also combine the sound
from the wireless microphone and built-in
microphone as you record.
Receiver unit Mlcr0ph0ne unit
For details on operating the WM-VI Wireless Microphone, refer to the
wireless microphone's instruction manual.
78 * Vdeo