Canon PIXMA MP750 Quick Start Manual page 9

•
Handling
• Do not attempt to disassemble or modify the machine. There are no user serviceable
parts inside the machine.
The machine contains high-voltage components. Never attempt any maintenance
procedure not described in this guide. Incorrect maintenance procedures may damage
the machine, or cause a fire or electrical shock.
• Do not use flammable sprays near the machine.
This coukt cause a fire or electrical shock if the spray comes into contact with electrical
components inside the machine.
• Others
• This product
emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
• When setting the machine near electric products with fluorescent lighting, separate the
machine at least 5 7/8 inches (150 mm) from electric products equipped with
fluorescent lighting. If you place it near to them, the machine may malfunction as a
result of the noise emitted by the fluorescent lighting.
• When turning OFF the power, be sure to press ION/OFF] and confirm that the Alarm
Lamp has shut off. If you pull the power plug out of the wall ontlet while the Alarm
Lamp is lit or flashing, the print head is not protected, and you may not be able to print
later.
CAUTION
You may cause injury or damage the machine if"you ignore any of"these safety
precautions.
• Location
• Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight.
• Do not install the machine in a location that is very humid or (lusty, in direct sunlight,
outdoors, or close to a heating source. Installing in such a location may result in fire or
electrical shock. To avoid the risk of fire or electrical shocks, install the machine in a
location with an ambient temperature range of 41 °F to 95°F (5°C to 35°C) and
humidity of 10% to 90% (condensation free).
• Do not place the machine on a thick rug or carpet. If fibers or dust come inside the
machine, it coukt cause a fire.