Canon PIXMA MP750 Quick Start Manual page 24

(5)InUse/Memory Lamp
Flashes or lights during operation. Lights also when there are docun/ents stored in the machine's
nlenlory.
(6) [COPY]
Switches tile machine to copy mode.
(7) _ [FAX]
Switches tile machine to fax mode.
(8) [SCAN]
Switches tile machine to scan mode. In scan mode. tile machine se:ms a document to your computer
according to the settings selected. This button is used when the machine is connected to a computer.
(9) [PHOTOI
Switches the machine to photo print mode.
(10) Alarm Lamp
Flashes when tile machine is turned ON or OFF when an error occurs, or when paper or ink has run
(l/It.
(11 ) [Enlarge/Reduce]
Sets tile enlargement or reduction ratio for copying.
(12) [Collate]
Selects software collation (sorting/.
(13) [Paper]
Selects tile paper size :rod paper type for copying, and [_ for receix ed faxes.
(14) [ON/OFF]
Turns the machine ON and OFF. Belk_re turning ON tile machine, make sure tile Scanning Unit is
closed.
(15) Numeric Keys
Enter numerical _alues such as the number of copies, as well as _ fax/telephone numbers and
characlers.
(16) _ [Tone]
Switches temporarily to tone dialing. Also changes tile mode when entering characters.
(17) ['4(-)1 and [b'(+)]
Scroll through menu selections, and increase or decrease the number of copies or the image lile
nllniber.
(18) [OK]
Selects items in menus, and confirms selections. Restores tile machine to normal operation if there
is an error while prinling or if paper jams. 1Ejectsdocuments remaining in the ADF.
23 Introduction Chapter 1