Bosch 13624 Operating/Safety Instructions Manual page 7

BM 2610925940 6-05 6/9/05 3:21 PM Pa_7
IMPORTANT: Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol Name
V Volts
A Amperes
Hz Hertz
W Watt
kg Kilograms
min Minutes
s Seconds
O Diameter
no No load speed
Designation/Explanation
Voltage (potential)
Current
Frequency (cycles per second)
Power
Weight
Time
Time
Size of drill bits, grinding wheels, etc.
Rotational speed, at no load
.../min Revolutions or reciprocation per minute Revolutions, strokes, surface speed,
orbits etc. per minute
0 Off position Zero speed, zero torque...
1,2, 3 .... Selector settings Speed, torque or position settings.
I, II, Ill, Higher number means greater speed
Infinitely variable selector with off Speed is increasing from 0 setting
'-_ Arrow Action in the direction of arrow
"X., Alternating current Type or a characteristic of current
Direct current Type or a characteristic of current
Alternating or direct current Type or a characteristic of current
[] Class II construction Designates Double Insulated
Construction tools.
(_ Earthing terminal Grounding terminal
_, Warning symbol Alerts user to warning messages
Ni-Cad RBRC seal Designates Ni-Cad battery recycling
program
This symbol designates
that this tool is listed by
Underwriters Laboratories.
This symbol designates
that this tool is listed by
the Canadian Standards
Association.
@ This symbol designates W_
that this tool is listed to ,,
C Canadian Standards by
Underwriters Laboratories.
This symbol
designates
This symbol designates that that
this tool is listed by this tool
! Ih _ Underwriters Laboratories, complies
C _VLJ US and listed to Canadian to NOM
v Standards by Underwriters Mexican
Laboratories. Standards.
-7-