Bosch 13624 Operating/Safety Instructions Manual page 17

BM 2610925940 6-05 6/9/05 3:21 PM Pa_17
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-
wire extension cords that have 3-prong plugs
and receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Tool's Cord Size in A.W.G.
Ampere
Rating CordLengthin Feet
25 50 100 150
3-6 18 16 16 14
6-8 18 16 14 12
8-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12
Wire Sizes in mm 2
CordLengthIn Meters
15 30 60 120
0.75 0.75 115 2.5
0.75 1.0 2.5 410
0.75 110 2.5 410
110 2.5 4.0
--
(* = standard equipment)
(** = optional accessories)
Screwdriver bit
Carrying case
** Tether hook
** 15 minute charger
** 30 minute charger (single bay)
** 30 minute charger (dual bay)
** 1 hour charger
-17-