Table of Contents
Advertisement
5.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom-left corner of the socket, and then
fit the socket alignment keys into the CPU
notches.
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
6.
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is spread in an even thin layer.
Some heatsinks come with pre-
applied thermal paste. If so, skip this
step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately, and seek
professional medical help.
7.
Close the load plate (A), and then push
down the load lever (B), ensuring that
the front edge of the load plate slides
under the retention knob (C).
2-6
Gold
triangle
mark
Alignment keys
B
A
Chapter 2: Hardware setup
CPU notches
C
Advertisement
Table of Contents
