Installing The Raid Controller Driver - Asus RS320Q-E7 RS12 User Manual

7.1.2

Installing the RAID controller driver

Windows Server OS
®
During Windows ® Server OS installation
To install the RAID controller driver when installing Windows
1. Boot the computer using the Windows
Windows ® Server OS Setup starts.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver...
2. Press <F6> when the message "Press F6 if you need to install a third party SCSI or
RAID driver..." appears at the bottom of the screen.
3. When prompted, press <S> to specify an additional device.
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage device(s):
<none>
* To specify additional SCSI adapters, DVD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
ASUS RS320Q-E7/RS12
Server installation DVD. The
®
ENTER=Continue F3=Exit
Server OS:
®
7-5