Table of Contents
Advertisement
6.3.1
Creating a RAID set
To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press <Enter>. The
1.
following screen appears.
2.
Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select a RAID
3.
level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives you want
4.
to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0
ST3160812AS
1
ST3160812AS
2
ST3160812AS
3
ST3160812AS
Select 2 to 6 disks to use in creating the volume.
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5.
Use the up/down arrow key to select a drive, and then press <Space> to select. A small
triangle marks the selected drive. Press <Enter> after completing your selection.
6-26
Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008
Copyright(C) 2003-12 Intel Corporation.
[
Name:
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size:
Capacity: 0.0
Sync: N/A
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change
[TAB]-Next
[ SELECT DISKS ]
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
All Rights Reserved.
CREATE VOLUME MENU
]
Volume0
128KB
GB
Create Volume
[
HELP
]
[ESC]-Previous Menu
Size
Status
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
[ENTER]-Select
Chapter 6: RAID configuration
Advertisement
Table of Contents
