Table of Contents
Advertisement
2-5
Installing the PCI Expansion Card
• Voltages can be present within the server whenever an AC power source is connected. This volt-
age is present even when the main power switch is in the off position. Ensure that the system is
powered-down and all power sources have been disconnected from the server prior to installing
a PCI card.
Failure to observe these warnings could result in personal injury or damage to equipment.
• The PCI riser assembly does not include a riser card or any cabling as standard. To install a PCI
card, a riser card must be installed.
Follow these instructions to PCI Expansion card:
1.
Lift the riser bracket slightly, then pull it out from the server chassis.
2.
Loosen the riser bracket screws.
3.
Attach the mini card to the riser bracket and ecure the mini card with screws.
4.
Orient the PCI card with the riser guide slot and push in the direction of the arrow until the PCI card
sits in the PCI card connector. Secure the PCI card with the screw.
5.
Align the riser bracket to the system module.
Hardware Installation
- 18 -
Advertisement
Table of Contents
