Advertisement
Quick Links
PRODUCT DATASHEET
ENERGIZER NH15-1600
Industry Standard Dimensions
mm (inches)
14.50 (0.571)
13.50 (0.531)
5.50 (0.217)
Maximum
7.00 (0.276)
Minimum
Discharge Characteristics
Typical Performance at 21ºC (70ºF)
1.4
1.3
1.2
320 mA
1.1
(0.2C)
1.0
0.9
0
3
Hours of Discharge
1.4
1.3
1.2
1.1
3200 mA
1.0
(2.0C)
0.9
0.0
0.5
1.0
Hours of Discharge
This data sheet contains typical information specific to products manufactured at the time of its publication.
Form No. EBC - 7102M
1.00 (0.039)
Minimum
50.50 (1.988)
49.20 (1.937)
160 mA
(0.1C)
6
9
800 mA
(0.5C)
1600 mA
(1.0C)
1.5
2.0
Important Notice
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Classification:
Chemical System:
Designation:
Nominal Voltage:
Rated Capacity:
Typical Weight:
Typical Volume:
Terminals:
Jacket:
* Based on 320 mA (0.2C rate) continuous discharge to 1.0 volts.
Internal Resistance:
The internal resistance of the cell varies with state of charge, as follows:
Cell Charged
30 milliohms
(tolerance of ±20% applies to above values)
AC Impedance (no load):
The impedance of the charged cell varies with frequency, as follows:
Frequency (Hz)
1000
Above values based on AC current set at 1.0 ampere.
Operating and Storage Temperatures:
12
To maintain maximum performance, observe the following general
guidelines regarding environmental conditions:
Charge:
Discharge:
Storage: -20ºC to 30ºC (-4ºF to 86ºF)
Humidity:
NOTE: Operating at extreme temperatures, will significantly
impact battery cycle life.
2.5
1-800-383-7323 USA/CAN
Specifications
Rechargeable
Nickel-Metal Hydride (NiMH)
ANSI-1.2H2
1.2 Volts
1600 mAh* at 21°C (70°F)
28.0 grams (1.0 oz.)
8.3 cubic centimeters (0.5 cubic inch)
Flat Contact
Plastic
Cell 1/2 Discharged
40 milliohms
Impedance (milliohms)
(charged cell)
Value tolerances are ±20%.
0ºC to 40ºC (32ºF to 104ºF)
0ºC to 50ºC (32ºF to 122ºF)
65±20%
www.energizer.com
AA
12
Page 1 of 1
Advertisement
