Windows Server 2008 R2 On Hp Integrity Servers - HP Integrity rx2800 - i2 Software Manual

rem Setting BCD
Bcdedit /set {bootmgr} device partition=z:
Bcdedit /set {memdiag} device partition=z:
Bcdedit /set {default} device partition=c:
Bcdedit /set {default} osdevice partition=c:
Bcdedit /set {FWbootmgr} displayorder {Bootmgr} /addfirst
b) In the Choose the script operating system field, select Windows and click Next.
c) In the Script Run Location field, select On the client computer.
d) In the Automation pre-boot environment field, select WinPE Managed (64 bit).
Add a Run Script task to create a sysprep-deploy.xml file to be used by Windows mini-
10.
setup. Follow these steps:
a) Select Run this script and enter the following script:
rem Configure sysprep File
set featuredir=%ALTIRIS_SHARE%\hpfeatures\ws6-ia64-en_us
copy /y "%featuredir%\sysprep-deploy.xml" "%featuredir%\sysprep-%ID%.xml"
set compname=%#*"select right(replace([name],' ',''),15) from computer
where computer_id={ID}"%
set productkey=%ws6-ia64-en_us-productkey%
set driverpath=%featuredir%\oem\drivers "%featuredir%\bin\hptoken.exe"
"%featuredir%\sysprep-%ID%.xml"
copy /y "%featuredir%\sysprep-%ID%.xml"
C:\windows\panther\unattend.xml
b) In the Choose the script operating system field, select Windows and click Next.
c) In the Script Run Location field, select On the client computer.
d) In the Automation pre-boot environment field, select WinPE Managed (64 bit).
Add a Distribute Software task to re-install minimal ISP components. Follow these steps:
11.
a) In the Name field, enter .\hpfeatures\ws6-ia64-en_us\oem\sysprep-post.cmd.
b) Select Copy all directory files.
Add a Power Control task. Following these steps:
12.
a) Select Restart.
b) Select Force applications to close without a message.
Execute the job on the managed server.
13.

Windows Server 2008 R2 on HP Integrity Servers

This section describes how to create jobs to capture and deploy a Windows Server 2008 R2
production image using the Microsoft ImageX tool.
Note
If you imported the ImageX image capture and deploy job instead of
creating it in RDP, you must create the following directory:
%ALTIRIS_SHARE%\hpfeatures\ws7-ia64-en_us\images
6