Handle Installation - Frigidaire FFHT2117PS Use & Care Manual

HANDLE INSTALLATION

CAUTION
Wear gloves and use extreme CAUTION
when installing these handles. The rounded
end of the handles may be sharp.
IMPORTANT
To ensure proper installation of handles,
please review these instructions and
illustrations thoroughly prior to installing the
handles.
Additionally, before installing the door
handles, make sure the door swing is
correct. Your model will have either a
right hand or left hand door swing. Follow
instructions in the Use & Care Guide to
reverse the doors, if necessary.
To attach metal refrigerator
handle:
1. Place rounded part of handle onto
shoulder screw on face of door and align
the two (2) holes in top of handle with
the two (2) holes in top of door. Do not
tighten the set screw yet.
2. Install the two (2) screws into the top of
the handle.
3. Tighten the set screw on the rounded part
of the handle until the handle is flush with
the door, then tighten another 1/2 turn.
Shoulder
Screw
Set
Screw
To attach metal freezer handle:
1. Place rounded part of handle onto
shoulder screw on face of door and align
the two (2) holes in bottom of handle
with the two (2) holes in bottom of door.
Do not tighten the set screw yet.
2. Install the two (2) screws into the
bottom of the handle.
6
Screw
Handle
Button
Plug
3. Tighten the set screw on the rounded part
of the handle until the handle is flush with
the door, then tighten another 1/2 turn.
Shoulder
Screw
Set
Screw
Screw
Stainless Steel Models
Shoulder
Screw
Set
Screw
Shoulder
Screw
Handle
Screw
IMPORTANT
Stainless steel handles and doors are not
reversible.
Nameplate
Handle
Screw
Handle
Set
Screw