Troubleshooting - Bosch WTE86300US Operating, Care And Installation Instructions Manual

Troubleshootin
RISK OF ELECTRICAL SHOCK !
EXPLOSION HAZARD!
Repairs or replacement of parts
may be carried out by authorized
technicians only.
Before calling the customer service,
check whether you can rectify the
fault yourself by means of the
following table.
If a fault cannot be rectified or
a repair is required:
1. Set program selector to "Off".
2. Turn off the circuit breaker.
3. Pull the mains plug out of the
socket.
4. Call customer service
(see page 19).
Problem
Dryerdoesnotstart.
"Start/Stop"indicatorlight doesnot
illuminate.
Programhasbeen interrupted."Filter"
indicatorlight illuminates, a warning
signalis emittedandthe display shows
"F:01" or "F:02".
Drumlight doesnotfunction.
"Start/Stop"indicatorlight doesnot
illuminate."WrinkleblocWFinished"
indicatorlights.
Thedisplayshows" 0-".
Possiblecause
Mainplug not inserted at all or notinsertedcorrectly.
A fuse of powersupplyhastripped.
"Start/Stop"buttonnot pressed.
Doornot closed.
Ambienttemperaturebelow41 °F/5 °C.
Lintfilter dirty.
Faultin programsequence or malfunction.
The room/cabinet i s not adequately ventilated.
Noprogramselected.
Lightbulbdefective,lightbulbburnedout.
Nopowersupply.
Faultin programsequence or malfunction.
Moisturesensordirty.
Remedialaction
Insertmainplug correctly,
Replace/switch o n fuse,
Press"Start/Stop"button,
Closedoor,
Increaseroomtemperature,
Cleanfilter as described on page 16,
Switchoff/switchon again,
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again,Restart p rogram,
Providean adequatesupplyof fresh air,
Switchoff/switchon again,
Selectprogram,
Changelight bulb,seepage 17,
Guarantee powersupply,
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again,Restart p rogram,
Cleanmoisturesensoras described on page17.
Switchoff/switchon again.
Spin laundryat higherspeedin the washing
machine.Switchoff/switchon again.
Unsuitable programselected. Selectprogramwith aid of the programselection
table(seepage 22).Switchoff/switchon again.
Maximumdryingtime was exceeded. Cleanlintfilter (seepage 16).
Checkhosefor condensation o utlet.
Spin laundryat a higherspeedin yourwasher.
Motor limittemperaturewas exceeded.
"Start/Stop"indicatorlight flashesand Condensation o utlet. Checkhosefor condensation o utlet.
the displayshows"F:03".
Laundrywastoo wet. Degree of dryinghasnot beenreached
or the dryingtime istoo long.
Displaymay indicate"F:04".
Switchoff dryer,leaveto cooldownfor 30 min.
Switchon again.Start program.
18