Ariston A45V Use And Care & Installation Instructions Manual page 20

Installation Instructions
Stacking Kit
The dryer is provided with a stacking kit which allows the dryer to be fitted to the top of an
Ariston washing machine•
Type W1024 (model AW120NA) use bracket A
Type W1026CO (models AW121NA or AW122NA) use bracket B
The kit contains, 2 brackets A and B, 2 self drilling screws•
Tools needed:- No.2 Philips Screwdriver•
SAFETY
For personal safety, DO NOT try to fit the dryer on top of the washing machine
on your own. A second person should help to lift the tumble dryer onto the
washer and to relocate the stacked washer and dryer.
• You will need to get at the back of the washing machine to fit the stacking kit and
dryer• If necessary pull the machine away from its location to get at the back of the
machine to fit the stacking kit and dryer•
2. Remove the two screws located one either side at the bottom back plate on the
tumble dryer• Retain the screws, as they will be reused• Screw the front adjustable
feet as far as possible into the base.
3. With the help of a second person, lift the tumble dryer into position on top of the
washing machine• Place the appropriate stacking kit bracket (A or B) onto the rear of
the dryer and fit with the screws removed in step 2.
4. Reposition the dryer so that the bracket lines up with the top trim of the washing
machine and ensure that the dryer is positioned in the center of the washing machine•
5. Secure the bracket to the washing machine, using the two self drilling screws provided•
Bracket A Bracket B
6. The stacking of the appliances is now complete and the machines can be positioned
and connected to the electrical source, using a separate socket for each appliance•
19