Advertisement
Available languages
Available languages
CONTROL PANEL AND FEATURES
This Use and Care Guide covers several different models. Not all models are shown.
Not all features and options are available on all models. Appearance
may vary.
LOAD SIZE
Medium
Cool
Warm
Off
Large
Cold
Hot
Light
6,
Regu{at
10
Heavy 14
Super Wash 16
10 Regulal'
6 Light
CASUAL
Spin
_aRO
Spin
DELICATE
o_
Rinse
Light
4
Regular 6
Pullto Star_ / Push_ostop
0
O
Load Size Control
Use this option to adjust the amount of water used with
your load size. Use enough water to allow the load to
move freely. NOTE: The highest water level will be lower
than that of pre-2011 washers.
Wash Temperature
Control
Wash Temperature Control senses and maintains uniform
water temperatures
by regulating incoming hot and cold
water.
[]
Warm and hot water will be cooler than what your
previous washer provided.
[]
Even in Cool wash, some warm water is let into washer
to maintain a consistent minimum temperature.
NOTE: On some models, the wash temperature
is
determined
by the selected wash cycle.
Select a wash temperature
based on the type of fabric and
soils being washed. For best results, follow the garment
label instructions, using the warmest wash water safe for
your fabric. See "Wash Temperature" Chart.
NOTE: In wash water temperatures colder than 60 ° F (15.6° C),
detergents do not dissolve well and soils can be difficult to
remove.
O
Extra Rinse (on some models)
If you desire an extra rinse at the end of your regular cycle,
turn the Extra Rinse knob to ON.
On models without the Extra Rinse knob, choose a second
rinse by pushing the Cycle Control knob in and rotating it to
any of the "Rinse" cycle settings.
O
Fabric Softener
(on some models)
If using fabric softener, set to ON to ensure proper
dispensing of fabric softener.
Cycle Control knob
Select the wash cycle best suited for your type of fabric.
See "Cycle Guide" for more details.
Advertisement
