Installing Your Refrigerator - Amana ARS266 Owner's Manual

Installing Your Refrigerator
How to Install and Remove Handles _,,ti,,,e_
Removing Handles for Distinctions 3-button Dispenser Models
Removing handles may be necessary when transporting unit through tight spaces.
Installing Front-Mounted Handles for Stainless Steel Models
If installing handles for the first time, the fresh food handles can be located within the fresh food section. The screw plugs will
be located in the literature pack.
II Loosen lower door ch'p on
door with 1//4''hex nut d_'ver.
Ig ocate predrllled hole at
base of handle, and tit
hollow end of handle
over lower door clip.
Insert 1,/4" hex nut
driver into predrillea
hole at base of handle
to tighten screw. Insert
screw plug into hole,
as illustrated.
' f _\
I
Repeat above steps to instMl other handle. )
Removing Front-Mounted Handles for Stainless Steel Models
Removing handles may be necessary when transporting unit through tight spaces.
1 .emovescrewplugatbaseo£ V/
handle with a very small 17at-blade/ /
screwdriver. _
•
Insert 1/4"hex nut driver into predrilled ['_
hole to remove screw. /_ I
3Repeat abovestepsto_move other h,_,_e.)
How to Remove and Install Panels
somemodels
Reference the sheet entitled Decorator Door Panel Installation Instructions shipped on the front of your unit.
7