How To Remove The Doors And Hinges; How To Install And Remove Handles - Amana ARS266 Owner's Manual

Installing Your Refrigerator
How to Remove the Doors and Hinges
Some installations require door removal to get refrigerator to final location.
I _ WARNING ]
To avoid severe personal injury or death, observe the following:
• Disconnect power to refrigerator before removing doors. Connect power only after replacing doors.
• Green ground wire must be attached to top hinge while performing door removal and replacement.
• Tape decorative panels (some models) securely into place before removing door handles.
[
CAUTION
I
To avoid property damage, observe the following:
• Protect soft vinyl or other floodng with cardboard, rugs, or other protective material, prior to moving refrigerator.
• To avoid damage or breakage to adjusting bolt, do not use power tools to correct leveling.
• DO NOT adjust unit to be any shorter than 68 ½" inches tall (minus hinge and cap). Doing so may damage underside
components.
How to Replace the Doors
I • To replace doors, follow the steps in How to Remove l
the Doors and Hinges in reverse order
J
How to Install and Remove Handles
Installing Handles for LCD and 5-button Dispenser Models (non-stainless steel)
If installing handles for the first time, the fresh food handles can be located within the fresh food section. The handle trim will
be located in the literature pack
1Remove two 1,/4"hex nut
screws from bottom oi
refn'gerator and greezel
door.
] I I_st:r: Scr_t:7°lreesma;bd:n_toelP'l
of handles and retainers on
bottom of door.