Akai PDP4290 Owner's Instructions Manual page 48

How toSet u pYour PC Software ONind0ws 0nly)
The Windows display-settings for a typical computer are shown below, However, the actual screens on
your PC will probably be different, depending upon your particular version of Windows and your par-
ticular video card, But even if your actual screens look different, the same, basic sebup information will
apply in almost all cases, (If not, contact your computer manufacturer or AKAI Dealer,)
On the windows screen, select in the following
sequence : Start _ Settings -_ Control Panel.
48
_i ........ I:'¢' 'ti,%:,:t,"iJ..........
When the control panel screen appears, click on
"Display" and a display dialog-box will appear.
Select the "Settings" tab in the display dialog-box,
The two key variables that apply the PDP-PC inter-
face are "resolution" and "colors." Tile correct set-
tings for these two variables are:
• Size (sometimes called "resolution"):
640 x 480 pixels.
• Color: "24-bit" color (might also be expressed
as "16 million colors")Shown at left is a typical
screen for "Display" dialog box.
If a vertical-frequency option exists on your dis-
play settings dialog box, the correct value is "60"
or "60 Hz." Otherwise,just click "OK" and exit
the dialog box.
Continue(]...