DVD
System
Setup{Continued)
General Setup Page
ANGLE MARK: Users can select a particular
camera angle.when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFR
On Screen
Display (OSD) Language:
Users
can select on-screen display language.
SPDIF OUTPUT MODE: Sets the audio outputs.
This DVD player includes three kinds of audio output:
1. SPDIF OFF: An analog surround sound format is output through the
back-panel connections for 2-CH audio out or 5.1 CH audio out.
2. SPDIF/RAW or SPDIF/PCM: This
surround sound format is output to a Dolby Digital/DTS decoder
through the coaxial connector on the back panel of the product.
CAPTIONS: This functionallows you to display or hide the caption.
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes.
LAST MEMORY:
This function is convenient when
you want to continue viewing a disc from the point
where you were watching before. Unlike the resume
function, the Last Memory function is effective even
the disc is removed from the player.
• When
Last Memory
is ON, each time when you remove a disc or stop
playing,
the DVD player memorises
the point when the DVD was stopped.
The DVD playback
may be resumed
from the memorised
point.
• The memory
point is lost if the TV is switched
off or in standby
and in
TV status.
@
Need help?
Do you have a question about the DV1418A and is the answer not in the manual?