DVD
System
Setup
,
!
General Setup Process
SETUP
1 .Press
the SETUP
button,
the
General
Setup
Page,Preference
Page
and Password
Setup
Page
will
be displayed
in turn.
2.Press
AorY
to select,the
item,then
press
_.to
enterthe
submenu.
3.Press
,A. orY
to setup,then
press
PLAY/ENTER
to confirm.
G
PLAY/ENTER
G
G
PLAY/ENTER
GOO
4.Press4
button toexit
the menu.
General Setup Page
ASPECT
RATIO DESCRIPTION
When
using
theDVD
with
theinternal
TV, select
4:3/LB.
The j_Jllo_ ing it_[brmution
upplie,_
onl_
i_hen the Dl/Doutput
is' _onne_tedto
un externul
TI4
®4:3/PS (PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the 4:3/LB (letter box)
is a more common choice, In PS mode,
widescreen
(16:9) material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded.
®4:3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV, Widescreen
(16:9) material will be shown in pure unaltered form, allowing the entire picture
area of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
®16:9
You may select this if you have a widescreen
(16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen
TV. This is
because some film directors prefer to use ultra widescreen
aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging,
@
Need help?
Do you have a question about the DV1418A and is the answer not in the manual?