Sony Bravia KDL-60R550A Operating Instructions Manual page 72

Condition
Screen mirroring
What kind of devices can
be connected to use the
Screen mirroring
function?
Video or sound
sometimes cuts out
Some pay contents
cannot be played
Applications
Apps are inaccessible
General
TV screen feels warm
One or more promotional
logo(s) appears (appear)
on the screen. (Demo
Mode)
Wide Mode changes
automatically
72
Explanation/Solution
• Sony Screen mirroring compatible devices (Xperia) can be
connected.
• Devices emitting radio waves, such as other wireless LAN
devices or microwave ovens, may interfere with the Screen
mirroring function using wireless LAN. Keep the TV or Sony
Screen mirroring compatible devices (Xperia) away from such
devices, or turn them off if possible.
• Communication speed may change according to the distance or
obstacles between devices, device configuration, radio wave
condition, line congestion or what device you use.
Communication may cut out due to the radio wave condition.
• The source device needs to be compatible with HDCP (High-
bandwidth Digital Content Protection) 2.0/2.1 system.
Some pay contents may not be displayed via a non-compatible
source device.
• Check that the LAN cable or AC power cord of the router/
modem* has been connected properly.
* Your router/modem must be set in advance to connect to the
Internet. Contact your Internet service provider for router/modem
settings.
• Try using apps later. The app content provider's server may be
out of service.
• Due to the thin profile of this television, the heat generated by the
LCD panel backlight and supporting electronics will be more
noticeable. This is normal operation and not a cause for concern.
• Press RETURN on the remote control to suspend Demo Mode.
Then, press HOME, select Settings and proceed with Initial
Setup in the Setup settings. Be sure to select Home on the
viewing environment (Location) step.
• The current Wide Mode setting is automatically replaced with the
4:3 Default setting when you change the channel or video input,
if 4:3 Default in the Screen settings is set to other than Off. If you
want to lock in Wide Mode selected with WIDE on the remote
control, set 4:3 Default to Off in the Screen settings (see page
54).
• Check the Auto Wide option in the Screen settings (see page
54).