Yamaha PSR-S950 Reference Manual page 53

3
Press the [F] button to select the channel for recording.
4
Press the [G] (STEP REC) button to call up the STEP RECORD display.
5
Start Step Recording by using the [A]–[J] buttons and [1 ]–[8 ] buttons.
Refer to the example on
[A]/[B]/
[C]
[G]
[H]
[I]
[J] DELETE
[1 ]
BAR
[2 ]
BEAT
[3 ]
CLOCK
[4 ]–
[8 ]
page 54 for specific instructions.
Moves the cursor in the list.
Determines the velocity (loudness) of the note to be entered. The velocity
value can be specified within a range from 1 to 127. The higher the velocity
value, the louder the sound becomes.
KBD.VEL: Actual resulting velocity
fff: 127
ff: 111
f: 95
mf: 79
mp: 63
p: 47
pp: 31
ppp: 15
Determines the gate time (actual length) of the note to be entered.
Normal: 80%
Tenuto: 99%
Staccato: 40%
Staccatissimo: 20%
Manual: The gate time can be set to any desired percentage by using the
[DATA ENTRY] dial.
Determines the note type to be entered: normal, dotted or triplet.
Deletes the data of the current line.
Sets the position of the note to be entered. Note that a quarter note has a reso-
lution of 1,920 clocks.
Determines the note length to be entered: whole-note, half-note, quarter-note,
eighth-note or sixteenth-note.
When a note is input, the
location (bar: beat: clock),
note name, velocity and
length listed in succes-
sion.
PSR-S950/S750 Reference Manual
3
53