Editing The Vocal Harmony Types - Yamaha PSR-S950 Reference Manual

Editing the Vocal Harmony Types

This section explains briefly how to create your own Vocal Harmony types, and lists the detailed parameters
for editing. A sum total of sixty types can be created and saved.
1
Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY]  [D]/[E] TYPE SELECT
2
Select a Vocal Harmony type to be edited by using the [A]–[J] buttons.
To call up the other display pages for further selections, press one of the [1 ]–[5 ] buttons.
2
2
3
Press the [8 ] (EDIT) button to call up the Vocal Harmony Edit display.
4
Use the TAB [E][F] buttons to call up the desired tab, then edit the Vocal Harmony by
using [A]–[G] buttons and [1 ]–[8 ] buttons.
There are three tabs in the Vocal Harmony Edit display; refer to
• OVERVIEW Edits basic parameters for Vocal Harmony type, including mode, Chordal Type and Vocal
Effect, etc.
• PART Adjusts volume and panning, etc. for each of the harmony notes (Harm.1, 2, 3 and Lead).
• DETAIL Detailed editing for Vocal Harmony type.
NOTICE
The settings here will be lost if you change to another Vocal Harmony type or you turn the power off without executing the Save operation.
5
Press the [I] (SAVE) button to save your edited Vocal Harmony type.
For details on the Save operation, refer to the Owner's Manual, Basic Operations.
The edited Vocal Harmony Type can be saved only to internal USER drive as a file. If you want to save this to the USB flash memory, save the User Effect
NOTE
file on the display called up via [FUNCTION]  [I] (UTILITY)  SYSTEM RESET  [H] (USER EFFECT).
3
pages 88–91 for editing each tab.
PSR-S950/S750 Reference Manual
4
5
4
8
87